Catalogue of composite track elements

Introduction

A composite track element can be seen as a track element that is built up out of a combination of different track elements. This article offers lots of possible combinations. Often using the technique of the Illusion_track.

The catalogue

When executing a composite track element, you may skip up to two track elements without receiving penalty time. When you see a yellow square in the image, it means there are overlapping track elements at that location. Rotating them or mirroring them may make them illegal or badly rendered.

Straight shortcut

Jumps

Compilation of jumps

Drops

Compilation of drops

Bridge in the way

Flying in the air with bridges in the way

Compilation

90° corners

Small 90° corners

A compilation of 90° corners, from top to bottom, 1x1 corners, 1x2 corners and 2x2 corners

Big 90 degree corners

90 degree corners out of two chicanes, lower right corner uses an overlap
5x5 high speed corner, there are multiple ways to set it up with the chicanes
Two example tracks, as a square and a circle

U-turns (180° corners) and Shortcuts off the hill

A compilation
Extra: 3x1 U-turn
Extra: Big U-turn, there are multiple ways to set it up with the chicanes

270° corners

Quite 360° even
Not truly 270°, possible to do a 180° and a 90° in opposite directions. The trick is always to go over all three chicanes and to visit the middle one twice.
A combination of two 270° corners